Spreader Plate
For applications where substrate requires lower point pressure, the 170mm circular spreader plate can be attached to the underside of the pedestal base.
£0.00
The design of the aluminium decking cleat allows you to create aluminium decking systems in the tightest of spaces by minimising the height build-up of your system. It can be used when a constricting height build-up restricts the available clearance between the waterproof substrate and the finished floor level; or where additional height is required on metal frame balconies. Joist cleats are height adjustable, catering for falls, or meeting door thresholds while contributing as little as 2mm build-up.
Allowable load | Uniformly distributed >4.0kN/m2, Concentrated 2kN |
---|---|
Aluminium grade | Aluminium alloy 6063 T6 |
Biological/chemical | Resistant to moulds, algae, alkali, bitumen, UV |
Compatible joists | DS joist range |
Reaction to fire | Mill finish - A1 |
Warranty | 30 years* |
Design life | 60 years* |
Code | Adjustable Height Range | Base Dimensions |
---|---|---|
ADC-0 | Adjustable Height Range: 2.5-7mm | Base Dimensions: 85 x 75mm |
ADC-1 | Adjustable Height Range: 2-15mm | Base Dimensions: 90 x 75mm |
ADC-2 | Adjustable Height Range: 2-28mm | Base Dimensions: 90 x 75mm |
ADC-3 | Adjustable Height Range: 2-40mm | Base Dimensions: 90 x 75mm |
ADC-4 | Adjustable Height Range: 15-78mm | Base Dimensions: 130 x 75mm |
A1 fire-rated, wood effect decking systems for waterproofed substrates
For help with ordering products, or for any other guidance regarding your project please contact Ryno on:
Or enter your details below if you would like us to contact you.